Hardware
MM1A - three channels analog controller
| power voltage: | 230 V AC |
| auxiliary voltage: | 12 V DC |
| input power: | max. 10 W (without external loads) |
| internal control voltage: | 12 V DC |
| isolation class: | class I |
| size: | 300x250x120 mm |
| IP protection: | IP 54 |
| IK protection: | IK 03 |
| cover: | termoplast (ABS) |
Channels
| lighting | ventilating | heating | |
| continuous operation | yes | yes | yes |
| internal control | timer | timer | by thermostat |
| external control | yes | yes | yes |
| external control voltage | +12 V | ||
| external control current | 40 mA | 109 mA | |
| output voltage | 230 V AC | ||
| output current | 2 A | 10 A | |
| output protection | fuse | ||
| output sign | glimmlamp after protection | ||
- Equipment contents 1 day mechanic timers. Minimal switching interval are 15 minutes.
- Use thermostat that opens circuit when the set temperature is reached.
The thermostat is not operating in 'external control' or 'continuous' mode! - CH 10 type fuses (10x38) are under cover.
Manuals
| 1: | Mains switch |
| 2: | Mains sign lamp |
| 3: | Extrenal/internal control switch |
| 4: | Continuous lighting switch |
| 5: | Continuous airing switch |
| 6: | Continuous heating switch |
| 7: | Lighting timer on/off switch |
| 8: | Airing timer on/off switch |
| 9: | Active lighting output sign lamp |
| 10: | Active airing output sign lamp |
| 11: | Active heating output sign lamp |
Internal structure
| 1: | lightning timer |
| 2: | airing timer |
| 3: | lighting output protection |
| 4: | airing output protection |
| 5: | heating output protection |
| 6: | inputs |
| 7: | outputs |
Schematic drawing
Download
| name | version | format | note |
| teljes dokumentáció csomagban | v170818-1.1 | tar.gz |
git clone https://github.com/pozsarzs/mm1a.git
